The following is an abstract for the selected article. A PDF download of the full text of this article is available here. Members may download full texts at no charge. Non-members may be charged a small fee for certain articles.

Phase-Modulation Fluorometer Using a Dynode-Voltage Burst-Modulated Photomultiplier Tube

Volume 59, Number 8 (Aug. 2005) Page 1049-1053

Iwata, Tetsuo; Araki, Tsutomu

We propose a new scheme for a phase-modulation fluorometer (PMF) in which a photomultiplier tube (PMT) is used as a photo detector whose gain is modulated sinusoidally with a burst signal of period T and duty ratio 0.5. The carrier wave of the burst modulation signal is synchronized with an incident fluorescence signal. In order to modulate the gain of the PMT, one of the dynodes in the PMT was deeply biased and the burst signal was superimposed. Because the fluorescence signal is converted to a direct current (dc) signal by the PMT internal modulation, we can make the value of the load resistance of the PMT relatively large under the condition τ ≤ T/2, where τ is a time constant of a low-pass filter attached to the output of the PMT. The proposed scheme brings about advantages in sensitivity and noise immunity in detecting weak fluorescence in comparison with those of the conventional PMF. The combined technique of the burst modulation of the gain of the PMT and the alternating current (ac) signal detection alleviates the influence of the background light.